v2rayN LAN Proxy Setup: Share Your PC’s Proxy with Phones and TVs

Set up v2rayN to share your PC’s proxy with phones and TVs. Find your LAN IP and port, configure device proxy settings, and troubleshoot Windows Firewall access safely.

At a glance

If v2rayN is already connected on your Windows PC, you can share its proxy with other devices at home. Enable LAN connections in the client, then enter your PC’s LAN IPv4 address and an HTTP-capable proxy port on your phone or TV. This guide uses sample values and explains how to tell a wrong port from a firewall block or an app that ignores proxy settings.

Enable the v2rayN LAN proxy

The “Allow connections from the LAN” setting determines whether other devices can connect to the proxy on your PC. It’s separate from Windows “System proxy”: the system proxy tells apps on your PC where to send requests, while the LAN setting makes the proxy available to devices on the same network. You don’t need to keep the system proxy enabled, but v2rayN and its proxy core must stay running.

Phone appLAN connectionPC proxy endpointRoute matchingDirect or proxied
  1. First, make sure the current node works on your PC. Test with an app explicitly configured to use the local proxy; being able to open a webpage on the PC doesn’t prove the request went through v2rayN.
  2. In v2rayN 7.x for Windows, go to “Settings” → “Parameter settings” and enable “Allow connections from the LAN” under “Core: Basic settings.” Labels may vary slightly between versions. Look for the option grouped with the local listening ports in the parameter window.
  3. Save the setting and wait for the core to reload. If it still listens only on the loopback address, quit and restart the client, then check the core log for a port conflict or a configuration load error.

Find your PC’s IPv4 address and listening port

Run ipconfig in Windows Terminal. Find the “Wireless LAN adapter WLAN” or “Ethernet adapter” that’s actually connected to your home router, then note its “IPv4 Address.” For example, if your PC is 192.168.1.23 and the default gateway is 192.168.1.1, use the former. Don’t use the gateway, a virtual adapter address, or 127.0.0.1—on your phone, that address points back to the phone itself.

Check the port in v2rayN under “Settings” → “Parameter settings.” This guide uses 10808, an example of an HTTP-capable mixed port; you don’t have to change your port to this number. If you enabled a separate LAN endpoint, use its configured port. If your version lists SOCKS and HTTP ports separately, enter the HTTP port for Android’s Wi-Fi manual proxy—not the SOCKS port or the remote port of a subscription node.

Example settings on the PC

LAN IPv4 address
192.168.1.23
LAN connections
Enabled
Listening port
10808, mixed proxy

Use the address and port configured on your PC.

Example settings on a phone or TV

Proxy mode
Manual HTTP proxy
Proxy hostname
192.168.1.23
Proxy port
10808

Enter only the address in the hostname field—don’t include http://. Enter the port separately.

After saving, check the listening status in PowerShell on your PC. Replace 10808 with the port you want to share. This checks the local listener; it doesn’t open the firewall.

Get-NetTCPConnection -State Listen -LocalPort 10808 |
  Select-Object LocalAddress, LocalPort, OwningProcess

Check the listening address before changing the firewall

If you see only 127.0.0.1 or ::1, opening the port in the firewall won’t help. First check the LAN setting and listener configuration in the client. If you see 0.0.0.0 or your PC’s LAN IPv4 address, the port is listening on that IPv4 interface. You still need to verify that the process belongs to the proxy core, then test the connection from another device.

Set up the proxy on an Android phone or TV

  1. First, make sure the devices can reach each other. For testing, connect your phone and TV to your home network. Your PC can use Ethernet; it doesn’t need to be on Wi-Fi like your phone. What matters is that your router allows the devices to communicate. A guest network may isolate devices even when internet access works.
  2. Change the current Wi-Fi settings on your phone. On many Android devices, go to “Settings” → “Network & internet” → “Internet,” tap the settings icon beside the connected Wi-Fi, select “Edit,” and expand “Advanced options.” Set “Proxy” to “Manual,” enter your PC’s address and port, and save. Some devices put the network editing controls under “Settings” → “WLAN.”
  3. Check the advanced settings for the TV’s current connection. On Android TV, go to “Settings” → “Network & internet,” open the current Wi-Fi details, and look for “Proxy settings” or “Advanced options.” If “Manual” is available, enter the hostname and port. Some TVs don’t offer this option over a wired connection; others let you set it only when adding a network. If you can’t find it, first check whether that connection type supports manual proxies. Don’t enter the proxy address in the IP address or gateway fields.
  4. Test an app that’s known to use the system proxy. Try a webpage you can normally access, and check the v2rayN log on your PC if possible. If the log level records connections, look for a new entry for the domain when you refresh the page. A change in your public IP alone isn’t enough to confirm success: the request may have reached the proxy and then been routed directly.

A manual Wi-Fi proxy setting usually applies only to that network; it won’t automatically carry over to mobile data or another Wi-Fi network. Once the browser test works, try the TV app you actually want to use. Some apps ignore the system proxy, and a regular HTTP proxy doesn’t forward all of a device’s UDP traffic. If playback fails, check whether the app supports proxies before changing nodes or allowing more traffic through the firewall.

Allow only the devices you need through Windows Firewall

If the PC is listening on its LAN interface but another device still can’t connect, first make sure you trust the home network. In Windows, go to “Settings” → “Network & Internet” and check the network profile for the current connection. Don’t switch a public Wi-Fi network to private just to make a test pass, and don’t turn off the entire firewall, even temporarily.

  1. Press Win + R, enter wf.msc, and open “Windows Defender Firewall with Advanced Security.” Go to “Inbound Rules” → “New Rule” and choose “Custom.” If you specify a program, select the core process that actually listens on the port—not just the v2rayN interface.
  2. Under “Protocol and Ports,” select TCP and enter the actual HTTP or mixed port under local ports. This guide uses 10808 as an example. There’s no need to open UDP when devices use a manual HTTP proxy.
  3. Under “Scope,” add only the IP addresses of devices that need the proxy, such as your phone at 192.168.1.41 and TV at 192.168.1.52. Select “Allow the connection,” enable only the “Private” profile, and give the rule a descriptive name. Check for broader existing allow rules and remove any you no longer need; adding a narrowly scoped rule won’t restrict older rules.

Common issues: connection failures, partial access, and problems after a restart

Your PC works, but the phone times out as soon as you save the proxy settings?

Use ipconfig to check the hostname entered on your phone, then verify that the core is listening on the right port. If both are correct, make sure the phone isn’t on guest Wi-Fi and that the firewall rule’s remote IP scope still includes its current address. If another Windows device is on the same router, run Test-NetConnection 192.168.1.23 -Port 10808 on that device, replacing the address and port with yours. A TcpTestSucceeded value of True means only that the TCP connection works—not that proxy requests will succeed.

The port is reachable, so why won’t webpages load?

First, make sure you entered an HTTP-capable endpoint, not a SOCKS-only port. Refresh the webpage and check the core log. If the request appears there, focus on node connectivity and the routing rule that matches it; there’s no need to loosen the firewall further. You can also open the same webpage on your PC through the same HTTP endpoint and compare the results.

The TV browser works, but the video app doesn’t use the proxy?

First, use the browser to confirm the proxy endpoint works, then open the video app and check the log for a corresponding connection. If the log records requests and shows browser traffic but nothing from the app, check whether the app has its own proxy setting. If it doesn’t, assume the app doesn’t use this Wi-Fi proxy. Re-entering the hostname or switching to another HTTP port usually won’t help.

It worked yesterday. Why doesn’t it work after restarting the PC?

Make sure v2rayN is running and the selected node still works, then check whether your PC’s LAN IPv4 address has changed. If it has, update the proxy hostname on your devices. If a phone or TV address has changed, check the firewall rule’s remote IP scope. The proxy won’t work while the PC is asleep. When you don’t need to share it, simply turn off the manual proxy on the device.

Download v2rayNChoose a client for your platform